Features mechanically driven auger with maximum efficiency. Self-Propelled and hydraulic raise, lower & steer for fingertip control with ease of operation and ease on the back. Simply sit on the seat and drive around. All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings fully self-contained premium quality self-propelled auger.
SIMPLY SIT ON THE SEAT AND DRIVE IT AWAY
Features mechanically driven auger with maximum efficiency. Self-Propelled and hydraulic raise, lower & steer for fingertip control with ease of operation and ease on the back. Simply sit on the seat and drive around. All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings fully self-contained premium quality self-propelled auger.
Increased capacity with our larger pickup intake flight. 9" Auger Capable of up to 2 ton per minute. 10" Auger Capable of up to 2 1/2 ton per minute. 11" Auger Capable of up to 3 ton per minute. 12' Auger Capable of up to 3 1/2 ton per minute.
THE MAIN FEATURES OF OUR ENGINE CRADLE
New spring loaded engine cradle which eliminates the belt tension idler. Fitted with a direct driven hydraulic pump. All augers complete with electric start motor & 23 litre fuel tank. Donaldson air cleaner fitted standard to 27, 31, 35, 37 & 40 H/P Vanguard Engines
The belts can be put in and out of gear from either side of the auger.
Fitted standard with a raised exhaust to keep it well out of the stubble reducing the fire risk.
Easily adjust the belt tension by adjusting the turnbuckle (pictured on the right). The spring allows the belts to be put in and out of gear with minimal effort.
Cover off with belts in gear, there are adjustable belt guides on the inside of the belts.
The belt guides & the cover hold the belts in position so when the belts are out of gear the auger will not drive.
Direct drive pump attaches to the three belt cast iron pulley.
Photo with cover on.
Direct drive pump attaches to the three belt cast iron pulley.
Photo with cover off.
A newly deigned manifold & exhaust has allowed us to directly attach the muffler to the manifold without the
use of flexible tubing.
Exhaust with rain cap fitted After market upgrades for existing augers are available.
The Fuses, Electric Brake Controller and Spout controller are tucked away in the channel of the cradle protecting them from the elements
Three belt drive with belt guides behind the belts that hold the belts when they are out of gear
Document holder attached to Auger holds motor and auger operating instructions
THE MAIN FEATURES OF OUR AUGER LIFT
The main lift hydraulic cylinder has a built in counter balance valve. This will stop the auger creaping down.
An extra pulley has allowed us to have the hydraulic cylinder rod inside the hydraulic cylinder barrel when the auger is in its resting/transporting position >>>
So the rod is not exposed to the elements reducing the risk of the cylinder rod pitting or bending in transport.
Reversible gear box standard on all Vennings augers. One of the two 1200 lumen Led Lights fitted to all Self Propelled Augers
10" Electric Brakes fitted to the road wheels with a self contained controller so you can tow the auger legally behind any vehicle with a trailer plug
All Vennings Self Propelled augers are over 1 ton so brakes are a legal requirement
A motion control valve has been added to the drive motor, providing a brake like function on the third wheel, allowing easier control and restricts the roll back when entering the silo, without roll on/back.
Heavy duty 20mm thick gear drive on the third wheel with Heavy Duty NEW 31x10.5R 15LT 6 Ply Tyres
Third wheel in transport position, No need to disconnect drive wheel or brake
Oversize sign & flags showing width extremities are fitted to 42’, 50’, 60’ & 70' Augers (not required on 35’ as it’s not oversize)
A flag is fitted to the end of all augers. A LED revolving light is fitted to the top end of all 42’, 50’, 60’ & 70' Augers as per legal requirments (not required on 35’ as it’s not oversize)
Optional Mudguards fitted with LED Brake/Turning/Tail lights
Standard Steel Hopper with safety mesh with cleanout trapdoor fitted
Steel hopper in transport position mounted to bottom frame so its always with auger.
Poly Hopper with rubber top. Slender design allows auger to be placed under silo with the hopper attached to the auger.
Optional Flexible Hopper with safety mesh
Optional collapsible detachable grain hopper attached and detaches in seconds.
Hopper can be used in any height between 420mm and 820mm by adjusting the chain and hook.
Collapsible hopper in lowered position 420mm from bottom of hopper to top of canvas
Fitted with removable safety mesh
Cleanout trapdoor on bottom of hopper
It can be used in any height between 420mm and 820mm by adjusting the chain and hook.
Safety Cage with removable tow hitch. All exposed flighting is made from 5mm thick plate steel
Tow hitch in storage when not in use so the tow hitch is always with the auger when its needed
Emergency Stop Switch fitted near intake end of auger
Document holder attached to Auger holds motor and auger operating instructions
Duplex sprockets fitted to all 9",10”, 11" & 12" Triplex sprockets fitted to 60’ X 11”, 60' X 12" and all 70'
Simply sit on the swivelling seat & drive around
Extra wide axles are fitted to all 60’ augers for increased stability and safety, Overall width on 60’ auger is 3,340mm
Overhead supports are fitted to 60’ augers for increased strength and support
60' x 10" at Maximum Lift 12.19 Metres 40'
60' x 10" over a Sherwell Ahrens (Tarranyurk) 126 Ton 158 M3 Model S1460 Bin
35' x 10" Auger at Maximum Lift 7.71 Metres (23' 6")
Optional adjustable spout in fully contracted position
Adjustable spout in mid position
Optional adjustable spout in fully extended position
Optional 3 Section drop spout with approximately 700mm drop
Optional 5 Section drop spout with approximately 1100mm drop
Optional 7 Section drop spout with approximately 1500mm drop
 |  |  |  |  |
Controls With Optional 7” Waterproof Monitor | Optional Camera fitted to outlet of auger | Fire Extinguisher supplied on all augers | Seat and controls | Safety operating stickers to promote safety |
OPTIONAL SERVICE SPARE PARTS KIT
Transmission Spare Parts Kit
Includes
3 X Main Drive Carlisle Super 2 Belts
1 x Duplex Drive Shaft Sprocket
1 x Duplex Flight Sprocket
1 x Duplex Drive Chain 60ASA with joiner
Motor & Hydraulic Service Kit
Includes
1 X Inner Air Cleaner Filter
1 x Outer Air Cleaner Filter
1 x Motor Oil Filter
3 x 1 Litre Bottles of SAE30 Motor Oil
1 x Fuel Filter
2 x Spark Plugs
1 x Oil Filter to suit Hydraulics
Standard Equipment
Vanguard Petrol or Yanmar Diesel Electric Start Motor
Heavy duty reversible gearbox in case of Auger jam and for ease of clean out.
Hydraulic Ram Raise and Lower
Hydraulic Ram Steering
9” Auger Tube is 2mm thick 10”, 11” & 12” Auger Tube is 3mm thick for increased strength and durability.
10" Electric Brakes fitted to the road wheels with a self contained controller so you can tow the auger legally behind any vehicle with a trailer plug. All Vennings Self Propelled augers are over 1 ton so brakes are a legal requirement
A motion control valve has been added to the drive motor, providing a brake like function on the third wheel, allowing easier control and restricts the roll on/back.
Banded Belts specifically designed for drives with pulsating loads. These belts consist of three/four v-belts joined together to provide superior performance, reliability and efficiency. These belts will give a longer life, greater strength, better resistance to vibration, high stability and smooth running on the toughest drives, better heat dissipation, and higher transmission efficiency than conventional wrap single belts. Triple Banded belts fitted to 35’, 42’, 50’x9”,10”&11” & 60’x10”. Quad banded belt fitted to 50’x12” 60’x11”&12” 70’x10,11"&12"
New 31 x 10.5R15LT 6 Ply Tyres on all 3 wheels
New 6 Stud Land Cruiser Hubs and Rims
Extra heavy 50mm axles and B class parallel bearings rated at 1600 kilograms.
Cast Iron (steel) taper fit 3 belt drive pulleys on 35’, 42’, 50’x9”,10”&11” & 60’x10”. 4 belt drive pulleys on 50’x12”, 60’x11”&12” & 70’x10”,11"&12"
Detachable Steel Hopper with a trapdoor mounts to the bottom frame when not in use, so it is always with the auger.
Detachable Tow Hitch
Heavy Duty 5mm Thick Large Pick up Flight
Emergency Stop Switch
Heavy Duty undercarriage
9 Litre Water fire extinguisher
23 Litre Fuel Tank
2 x 1200 Lumen LED work lights
Fitted with a flag at the top end of the auger.
42’, 50’, 60’ & 70' augers are fitted with an oversize sign, LED revolving light at the top of the auger and flags over the wheels. (not required on 35’ augers as they are not oversize)
Optional Equipment
Waterproof 7" LCD Monitor and waterproof camera so you can see what's going on at the end of the auger
Adjustable 12 volt electric discharge spout
Mudguards fitted with LED Brake/Turning/Tail lights
Bean Flighting (reduces capacity on cereals by 2-3 bags per minute)
Drop Spouts
Spare parts kit includes Motor Service kit (includes 1 x inner & 1 X outer air filter, 1 x oil filter, 3 x 1 litre bottles of oil, 2 x spark plugs & 1 x fuel filter), Transmission Spare Parts Kit (Kit includes 3 x Carlise super 2 drive belts, 1 x drive shaft sprocket, 1 x flight sprocket & 1 x drive chain Hydraulic Service Kit (Kit includes 1 x Hydraulic Oil Filter)
Motor Options
27 H/P Vanguard
31 H/P Vanguard
35 H/P Vanguard
37 H/P EFI Vanguard
40 H/P EFI Vanguard
36 H/P Yanmar Diesel Engine (3 cylinder)
48 H/P Yanmar Diesel Engine (4 cylinder)
Size | Approx. Capacity | Approx. Lift | Minimum Recommendations |
35' X 9" | 2 1/2 Ton Per Minute | 23' 6" (7.71m) | Minimum 27 H/P |
35' X 10" | 2 1/2 Ton Per Minute | 23' 6" (7.71m) | Minimum 27 H/P |
35' X 11" | 3 Ton Per Minute | 23' 6" (7.71m) | Minimum 31 H/P |
35' X 12" | 3 1/2 Ton Per Minute | 23' 6" (7.71m) | Minimum 37 H/P |
42' X 9" | 2 Ton Per Minute | 30' (9.14m) | Minimum 27 H/P |
42' X 10" | 2 1/2 Ton Per Minute | 30' (9.14m) | Minimum 31 H/P |
42' X 11" | 3 Ton Per Minute | 30' (9.14m) | Minimum 35 H/P |
42' X 12" | 3 1/2 Ton Per Minute | 30' (9.14m) | Minimum 37 H/P |
50' X 9" | 2 Ton Per Minute | 35' 4" (10.77m) | Minimum 27 H/P |
50' X 10" | 2 1/2 Ton Per Minute | 35' 4" (10.77m) | Minimum 31 H/P |
50' X 11" | 3 Ton Per Minute | 35' 4" (10.77m) | Minimum 35 H/P |
50' X 12" | 3 1/2 Ton Per Minute | 35' 4" (10.77m) | Minimum 40 H/P |
60' X 10" | 2 1/2 Ton Per Minute | 40' 6" (12.30m) | Minimum 37 H/P |
60' X 11" | 3 Ton Per Minute | 40' 6" (12.30m) | Minimum 40 H/P Petrol |
60' X 12" | 3 1/2 Ton Per Minute | 40' 6" (12.30m) | Minimum 36 H/P Diesel |
70' X 10" | 2 1/2 Ton Per Minute | 45' 9" (13.95m) | Minimum 40 H/P Petrol |
70' X 11" | 3 Ton Per Minute | 45' 9" (13.95m) | Minimum 48 H/P Diesel |
70' X 12" | 3 1/2 Ton Per Minute | 45' 9" (13.95m) | Minimum 48 H/P Diesel |
All Vennings Self Propelled Augers are now fitted with Electric Brakes with a self-contained controller so the auger can be legally towed at the sign posted speed behind any vehicle.
In S.A. & N.S.W. the maximum speed at which you can tow any agricultural implement without brakes is 50 km/hour. In Vic. the maximum speed at which you can travel is 20km/h less than the road speed limit.
If your agricultural implement is fitted with brakes, normal speed limits apply.
We can fit electric brakes to push around and PTO augers, and supply kits so they can be fitted to old augers, please contact us if you would like more information.