28 Ton 33 M³ Galvanised Chaser Bin
Manufactured from Heavy Duragal Channel and RHS
Illustrated 25 Ton 30 M³ Chaser Bin with Roll Tarp and Hydraulic Folding Chute standard on all 25 Ton Chaser Bins Now 28 Ton 33 M³
The unit is standard with a 15" discharge auger, with a capacity of up to 5 tonne per minute with an optional 18" discharge auger available. The standard drive is setup for a 540 rev drive tractor with an option of 1000 rev drive or hydraulic drive if sufficient oil supply. The cleaning of this unit is simple, just pull the floor bar out from the back and the bin will clean out completely.
CHASER BIN FEATURES AND OPTIONS
CHASSIS | Manufactured from Heavy Duragal Channel and RHS |
BIN BODY | Manufactured from 1.5 mm Galvanised butt welded sheet steel |
AXLES | Axles are New heavy duty 10 stud with a 60 ton weight rating |
TYRES | Recommended on New Tractor Tyres 30.5 x 32 16 ply with New rims other sizes and options available |
PTO / HYD DRIVE PTO | Drive with slip clutch, 540 RPM drive standard or optional 1000 RPM Drive, Heavy Duty Gear box with 1” drive sprockets. Hydraulic drive also available (If sufficient oil supply) |
TRACTOR | Recommend a minimum of 180 H/P on firm ground |
DISCHARGE AUGER | Fitted with hydraulic raise & lower and folding chute. Standard with 15” Auger with a discharge rate up to 5 ton per minute. Optional 18” auger with a discharge rate greater than 6 ton per minute |
DISCHARGE HEIGHT | Minimum 4.5m |
BIN HEIGHT | 3.3m |
FLOOR AUGER | 10” Flight. Removable full length slide out floor and trap door for easy cleaning. Hydraulic ram controlled shut off doors cover auger flight allowing bin to be unloaded at any speed |
FOLDING CHUTE | Hydraulic ram controlled folding chute on end of discharge auger (pictured above) |
LED WORK LIGHT | 1200 Lumen LED Work light mounted by the discharge spout (pictured above) |
SIGNS & LIGHTS | Fitted with over size sign, revolving light and LED stop tail & turning lights (pictured above) |
DROP SPOUT | Optional Drop Spout Tube or hose for filling sheep feeders, auger hoppers etc. |
SCALES | Optional scales with .05% accuracy. Two weigh cells under the axle & one at the tow hitch (pictured above) |
QUAD VIEW CAMERA | Optional 9” Quad view monitor with 3 Camera’s mounted on the Bin, one on the end of discharge chute, one inside the bin and one at the rear of the bin |
Did you know; without a chaser bin, it isn't uncommon for a harvester to spend up to 35% of its time in the paddock unloading